1. Home
  2. Electrical and Mechanical Technology

Electrical and Mechanical Technology

Abbreviation
ELM

Industrial Robotics I

Course ID
134623
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Online Course Fee: $15. Lab Fee: $50. Students to check Canvas for lab hours. This is a hybrid section: part in-person and part web-based. Students must attend the in-person meetings and sign into the web-based portion on the first day of class or risk being dropped for non-attendance. In-person class meetings will be scheduled based on students' availability. Labs will be held in EDSN 170 and 173. Students must complete all coursework by 12/9/2023. To schedule class meeting times please contact Jack Sato (jsato@tmcc.edu) or Nathan Lower (nlower@tmcc.edu).
Section
1501
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This is an introductory course for industrial robotics. Students will learn how to safely test and operate various elements of industrial robots. This course satisfies 10 embedded hours toward specified programs and certificates for AAS Math/Quantitative Reasoning General Education requirements.

Class Type
Hybrid
Status
Open
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
140
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
WebCollege • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Online Course Fee: $15. Lab Fee: $50. Students to check Canvas for lab hours. This is a hybrid section: part in-person and part web-based. Students must attend the in-person meetings and sign into the web-based portion on the first day of class or risk being dropped for non-attendance. In-person class meetings will be scheduled based on students' availability. Labs will be held in EDSN 170 and 173. Students must complete all coursework by 12/9/2023. To schedule class meeting times please contact Jack Sato (jsato@tmcc.edu) or Nathan Lower (nlower@tmcc.edu).
Class Subject Abbr
ELM

Programmable Logic Controllers I

Course ID
102226
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. This class is scheduled to meet face-to-face. Please see Canvas for lab days and times. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to Programmable Logic Controllers (PLC) and related topics. Programming, troubleshooting, and theory will all be covered. This course satisfies 10 embedded hours toward specified programs and certificates for AAS Math/Quantitative Reasoning as well as 10 embedded hours toward specified programs and certificates for AAS Science General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
134
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class is scheduled to meet face-to-face. Please see Canvas for lab days and times. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
ELM

Programmable Logic Controllers I

Course ID
102226
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for lab days and times. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to Programmable Logic Controllers (PLC) and related topics. Programming, troubleshooting, and theory will all be covered. This course satisfies 10 embedded hours toward specified programs and certificates for AAS Math/Quantitative Reasoning as well as 10 embedded hours toward specified programs and certificates for AAS Science General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
134
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for lab days and times. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
ELM

Electric Motors and Drives

Course ID
102224
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for lab days and times. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to electric motor drives. Topics will include how to connect, configure, adjust and operate different drives for motor operation.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
129
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for lab days and times. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
Prerequisite: ELM 127 or instructor approval.
Class Subject Abbr
ELM

Electric Motors and Drives

Course ID
102224
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for lab days and times. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to electric motor drives. Topics will include how to connect, configure, adjust and operate different drives for motor operation.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
129
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for lab days and times. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
Prerequisite: ELM 127 or instructor approval.
Class Subject Abbr
ELM

Introduction to AC Controls

Course ID
102222
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. This class is scheduled to meet face-to-face. Labs open Mon.-Fri., closed Wed. Fri., evening hours available. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to motor control and control logic. Students will work with a variety of industry-standard dynamics related to the application of motors in a manufacturing setting. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations and 10 embedded hours toward specified programs and certificates for AAS Science General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
127
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class is scheduled to meet face-to-face. Labs open Mon.-Fri., closed Wed. Fri., evening hours available. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
ELM

Introduction to AC Controls

Course ID
102222
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab, labs open Mon.-Fri., closed Wed., evening hours available. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to motor control and control logic. Students will work with a variety of industry-standard dynamics related to the application of motors in a manufacturing setting. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations and 10 embedded hours toward specified programs and certificates for AAS Science General Education requirements.

Class Type
In-Person Class
Status
Full
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
127
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab, labs open Mon.-Fri., closed Wed., evening hours available. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
ELM

Electrical/Electronic Circuits

Course ID
134345
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for lab days and times. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9602
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course will cover basic principles of AC/DC electrical circuits. Topics will include foundational mathematical calculations, use of diagnostic equipment to perform troubleshooting, and introductory electrical circuit diagrams. This course satisfies 15 embedded hours toward specified programs and certificates for AAS Math/Quantitative Reasoning General Education requirements.

Class Type
In-Person Class
Status
Full
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
110
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for lab days and times. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
ELM
Subscribe to Electrical and Mechanical Technology