Page 79 - 2012-2013 TMCC College Catalog

B-58 2012-2013 TMCC College Catalog
Drafting Emphasis
Manufacturing Technologies Degree – Associate of Applied Science
Drafting is a critical skill for a diversity of industries, including
manufacturing, engineering, construction and architecture.
Students in the TMCC drafting program develop both manual
and computerized drafting skills, including standard two-
dimensional drawings and three dimensional solid modeling.
With an AAS degree, drafters are prepared to work with designers
and engineers to develop graphic instructions used to complete a
variety of projects.
DegreeOutcomes
Students completing the degreewill:
• Fulfill the requirements of the Associate of Applied Science.
• Demonstrate competency in their specified emphasis.
Emphasis Outcomes
Students completing the emphasis will:
• Understand drafting conventions including symbols,
linetypes, lineweights, and dimension styles as applicable to
mechanical drawings.
• Create complex drawings including orthographic projections,
pictorials, working drawings, and development drawings; and
prepare drawing details including auxiliary views, sections,
tolerances, and surface finishes, all within specifications.
• Create complex 3D models to specifications using advanced
commands.
General Education Requirements
Diversity (3 credits)
Refer to the ‘Diversity’ section of the general education
description of this college catalog for a list of approved courses.
Designated diversity courses can be used to fulfill other general
education or certificate requirements.
English/Communications 6 credits
Recommended: ENG 107
Human Relations 3 credits
Recommended: CE 201
Quantitative Reasoning 3 credits
Recommended: MATH 126
Science 3 credits
Recommended: PHYS 100
Social Science/Humanities 3 credits
U.S. and Nevada Constitutions 3 credits
Total General Education Requirements 21 Credits
Core Requirements
AIT 110 General Industrial Safety. ...................................1
MPT 140 Quality Control....................................................3
DFT 110 Print Reading for Industry. .................................3
Total Core Requirements 7 Credits
Emphasis Requirements
CADD 100 Introduction to Computer-Aided Drafting...........3
CADD 105 Intermediate Computer-Aided Drafting..............3
CADD 140 Technical Drafting I.............................................3
CADD 141 Technical Drafting II............................................3
CADD 142 Technical Drafting III...........................................3
CADD 245 Solid Modeling and Parametric Design...............3
CADD 299 Capstone/Assessment.........................................1
CADD Elective Choose 3 credits from remaining CADD classes. ..3
DFT 100 Basic Drafting Principles. ....................................3
ENGR 100 Introduction to Engineering Design....................3
MATH 127 Pre-Calculus II.....................................................3
Total Emphasis Requirements 31 Credits
Elective Requirements
Choose one of the following:
DFT 240 Introduction to 3D Studio Max............................3
IS 101 Introduction to Information Systems..................3
MTT 140 Inspection Techniques.........................................3
Total Elective Requirements 3 Credits
Total Degree Requirements 62 Credits
Suggested Course Sequence
First Year Course # Title Credits
1st Semester
Humanities/ Diversity AAD 201 History of the Built Environment 3
Core AIT 110 General Industrial Safety 1
Emphasis CADD 100 Introduction to Computer-Aided Drafting 3
Emphasis DFT 100 Basic Drafting Principles 3
Core DFT 110 Print Reading For Industry 3
Quantitative
Reasoning MATH 126 Pre-Calculus I 3
Total 16
2nd Semester
Emphasis CADD 105 Intermediate Computer-Aided Drafting 3
Emphasis CADD 140 Technical Drafting I 3
Emphasis CADD 141 Technical Drafting II 3
Communications ENG 107 Technical Communications I 3
Emphasis MATH 127 Pre-Calculus II 3
Total 15
Second Year Course # Title Credits
3rd Semester
Elective Choose CADD course 3
Emphasis CADD 142 Technical Drafting III 3
English Elective 3
U.S. and
Nevada Constitutions Elective 3
Core MPT 140 Quality Control 3
Total 15
4th Semester
Elective Choose from list 3
Emphasis CADD 245 Solid Modeling & Parametric Design 3
Emphasis CADD 299 Capstone/Assessment 1
Human Relations CE 201 Workplace Readiness 3
Emphasis ENGR 100 Introduction to Engineering Design 3
Science PHYS 100 Introductory Physics 3
Total 16
Degree Total 62